File Name: y7 prime 2018 LDN-L21 FRP Remove Done 100% One Click in Test Point BY Haroon shahzad.rar скачать прошивку Filesize: 0.25 KB Current URL Page: https://androidhost.ru/1n8D Download URL File:

How to update firmware Huawei & Honor device ?

Version-1: SD card Forcible Upgrade

Step 1: Prepare a SD card with a capacity of at least 8 GB. A Sandisk, Kingston, or Kingmax SD card is recommended.

Step 2 (optional): Format the SD card to ensure the capacity is sufficient.

Step 3: Check that the directory of all files is intact in dload. Copy the dload document to the root directory in the microSD card.

Step 4: Check that the directory and files are intact in the SD card root directory.

Step 5: Power off the phone, insert the microSD card, and

For EMUI 12.x,press the VOLUME UP key and the POWER key at the same time, then it will enter recovery interface, and then choose the “Update mode > Memory card/OTG update mode” to start the upgrade. If the product do not have the entity VOLUME key, just press the POWER key for more than five times when power on, then choose the “Update mode > Memory card/OTG update mode” to start the upgrade.

Step 6: During the upgrade, a progress icon will be displayed. After the progress icon is fully loaded, the phone will restart automatically, and the upgrade is completed.

Note: the SD card keep in connecting until the screen displays “Update success”.

For EMUI operating system, shows as below:

Version-2: OTG Forcible Upgrade

Step 1: Prepare a U disk with a capacity of at least 8 GB. A Sandisk, Kingston, or Kingmax U disk is recommended. And an OTG cable.

Step 2 (optional): Format the U disk to ensure the capacity is sufficient.

Step 3: Check that the directory of all files is intact in dload. Copy the dload document to the root directory in the U disk.

Step 4: Check that the directory and files are intact in the U disk root directory.

Step 5: Power off the phone, insert the OTG cable & U disk, and

For EMUI 12.x, press the VOLUME UP key and the POWER key at the same time, then it will enter recovery interface, and then choose the “Update mode > Memory card/OTG update mode” to start the upgrade. If the product do not have the entity VOLUME key, just press the POWER key for more than five times when power on, then choose the “Update mode > Memory card/OTG update mode” to start the upgrade.

Step 6: During the upgrade, a progress icon will be displayed. After the progress icon is fully loaded, the phone will restart automatically, and the upgrade is completed.

Note: the OTG cable & U disk keep in connecting until the screen displays “Update success”.

For EMUI operating system, shows as below: